T4

$4,199.00
Rating:
98 % of 100
Contact Your Sales Rep Call (877) 268-4867
Designed for concealed carry, the T4 may be the best of both worlds when it comes to muzzle controllability and magazine capacity in a 1911 carry pistol. The T4 contains some of the most evolutionary features offered by the company. The T4 resembles the popular T3, but on a 3.8”-barrel platform. Reliability was the most important consideration when plans for the new pistol began, hence the 3.8" Nighthawk Custom match grade barrel over the more popular, but less reliable, 3.5" or shorter barrel. Additionally, the Nighthawk Everlast Recoil System was modified to fit into the smaller T4 frame, thus reducing felt recoil and decreasing recovery time between shots. The frame is thinned just like Nighthawk Custom's popular Lady Hawk. The proprietary barrel is crowned and recessed with the slide. On the outside, the front of the slide has cuts designed to reduce weight. They taper in towards the crowned barrel, giving a unique look to the T4 like no other handgun produced by Nighthawk Custom. Grips are like the T3 and are thinned for less bulk.
One Gun, One Gunsmith.
Fully Machined Series (FM)
This product has been proudly manufactured at our factory in Berryville, Arkansas, USA.
FEATURES:
  • Black nitride finish
  • Forged officer size frame and 3.8” barrel
  • Hand fit frame and slide
  • Hand fit match grade 9mm bull barrel
  • Throated barrel
  • Polished feed ramp
  • Everlast Recoil System
  • Coarse rear cocking serrations
  • Carry cut on the front of the slide
  • Heinie Slant Pro Straight Eight rear sight
  • G10 black alien grips
  • 25 lines per inch checkered front strap and mainspring housing
  • Hand blended grip safety
  • Shortened slide stop and beveled frame
  • Tuned and polished extractor
  • Hand fit firing pin stop
  • Lightweight aluminum Nighthawk Custom tri-cavity trigger
  • Hand polished ignition components
  • Custom trigger job set with 3.5 to 3.75 pound trigger
  • Completely dehorned for comfortable carry
  • Hand beveled edges
  • Ultra Hi-Cut Front Strap
  • Includes two 8-round magazines
Frame Size
Officer
Caliber
9 mm
Light Rail
No Rail
Safety
Single
Height
4.99"
Overall Length
7.40"
Pistol Width
1.32"
Slide Width
0.92"
Grip Thickness
Thin
Weight Empty
34.3 oz
Sight Radius
5.40"
Barrel Length
3.8"
Magazine Capacity
8
Rear Sight
Heinie Straight Eight Slant Pro
Front Sight
Tritium
Finish
Black Nitride
Firing Pin Size
.38 Super
Firing Pin Material
Stainless Steel

Custom Options & Upgrades

  • Barrel
  • Engraving
  • Finishes
  • Frame
  • Front Strap & Main Spring Housing Treatment
  • Magwell / Main Spring Housing
  • Safety
  • Sight
  • Slide

Barrel Options

Price Upgrade
+ $100 Flute Barrel Hood

Engraving Options

Price Upgrade
+ $150 Custom Block Lettering
+ $50 No Roll Marks, Naked Slide

Available Finishes

Price Upgrade
NO COST Cerakote finishes (burnt bronze, OD green, flat dark earth, sniper gray, tactical gray, satin mag)
+ $75 Black Out Option. Blacken Trigger, Barrel, Plug, and Bushing
+ $350 Battle-Worn Bronze Custom Finish, for New Pistol Order
+ $150 Smoked Nitride
+ $350 Battle-Worn Steel Custom Finish, for New Pistol Order
+ $350 Custom Silver Patriot Finish, with American Flag, New Pistol Order
+ $350 Shadow Camo Urban Finish, for New Pistol Order
+ $350 Shadow Camo Tan Finish, for New Pistol Order
+ $350 Shadow Camo Green Finish, for New Pistol Order
+ $350 Urban Multi Finish, for New Pistol Order, Black, Gray, OD, Urban Multi Colors
+ $200 Stainless Steel Upgrade, Complete Gun
+ $425 Polish all slide bevels, serrations, scallops, frame bevels, slide stop bevel, thumb safety bevel, hammer bevel, barrel bushing if uncrowned barrel, inside and flats of magwell, ends of screws, pins, and match catch. Polish ejection port bevels. Cann...
+ $150 Polish Flats of Frame and Slide

Frame Upgrades

Price Upgrade
+ $200 Aluminum Frame
+ $175 Hand Stipple Underside of Trigger Guard
+ $200 Checker Front of Trigger Guard
+ $175 Checker Underside of Trigger Guard
+ $200 Hand Stipple Front of Trigger Guard

Front Strap & Main Spring Housing Treatment

Price Upgrade
+ $100 Checker Front Strap 20 Lines Per Inch
+ $100 Checker Front Strap 30 Lines Per Inch
+ $200 Hand Stipple Front Strap of Frame
+ $75 Hand Stipple Mainspring Housing
+ $100 Scallop Front Strap
+ $50 Scallop Mainspring Housing

Magwell / Main Spring Housing Upgrades

Price Upgrade
+ $150 Magazine Well Upgrade, Blended (Nighthawk)
+ $200 Magazine Well Upgrade, Blended (Nighthawk), T3 Style
+ $250 Magazine Well Upgrade, Blended (Nighthawk) Falcon One Piece Magwell / Mainspring Housing Combination

Safety Upgrades

Price Upgrade
+ $150 Ambi Safety Upgrade

Sight Upgrades

Price Upgrade
+ $100 Sight Upgrade, Nighthawk Gold Bead Front Sight Upgrade
+ $50 Fiber Optic Front Sight Upgrade
+ $350 IOS Sight Upgrade - optic plate and RMR sold separately
+ $150 IOS plate for Trijicon RMR
+ $700 Trijicon RMR (RM06)

Slide Upgrades

Price Upgrade
+ $115 Additional NH Extractor Finished and Tuned to match pistol, Note if checkering or serrations are needed on extractor.
+ $200 Checker Rear of Slide
+ $125 Serrate Rear of Slide
+ $100 Serrated Slide Top
Write Your Own Review
You're reviewing:T4
Your Rating