Falcon Commander

$4,199.00
Rating:
100 % of 100
Contact Your Sales Rep Call (877) 268-4867

The Falcon Commander has been a favorite in the Nighthawk Custom lineup since it originated. Each Nighthawk Custom 1911 is Fully Machined and completely hand fit by a single gunsmith. This 4.25” custom 1911 is chambered in .45 ACP with the sleek lines and all the features you need. The Falcon Commander pistol is easily identified by the Hi-Power style cuts on the front of the slide. It also has ball cut cocking and top of slide serrations, a hand-crowned barrel, and the Nighthawk Custom one-piece magwell. The Falcon Commander comes with a Black Nitride finish, tritium sights, and includes two (2) .45 ACP magazines.

One Gun, One Gunsmith.
Fully Machined Series (FM)
This product has been proudly manufactured at our factory in Berryville, Arkansas, USA.
FEATURES:
  • Black nitride finish
  • Forged commander size frame and 4.25" barrel
  • Hand fit frame and slide
  • Hand fit match grade .45 ACP barrel
  • Crowned barrel flush with bushing
  • Throated barrel
  • Polished feed ramp
  • One-piece magwell/mainspring housing
  • Hand blended magwell
  • Hand blended grip safety
  • Shortened slide stop and beveled frame
  • Three ball-cut grooves on the top of the slide
  • Falcon cut on the front of the slide
  • Ball-cut rear cocking serrations
  • Heinie Ledge Straight Eight Tritium night sights
  • G10 black Golf Ball grips with Nighthawk Custom logo
  • 25 lines per inch checkered front strap and mainspring housing
  • 40 lines per inch serrated rear of slide to match rear sight
  • Smooth recoil spring plug
  • Tuned and polished extractor
  • Hand fit firing pin stop
  • Lightweight aluminum Nighthawk Custom tri-cavity trigger
  • Hand polished ignition components
  • Custom trigger job set with 3.5 to 3.75 pound trigger
  • Completely dehorned for comfortable carry
  • Hand beveled edges
  • Ultra Hi-Cut Front Strap
  • Includes two 8-round magazines
Frame Size
Commander
Caliber
9 mm / .45 ACP
Light Rail
No Rail
Safety
Single
Height
5.6"
Overall Length
7.82"
Pistol Width
1.40"
Slide Width
0.92"
Grip Thickness
Regular
Weight Empty
36.7 oz
Sight Radius
5.76"
Barrel Length
4.25"
Magazine Capacity
8
Rear Sight
Heinie Straight Eight Ledge
Front Sight
Tritium
Finish
Black Nitride
Firing Pin Size
.38 Super
Firing Pin Material
Stainless Steel

Custom Options & Upgrades

  • Barrel
  • Caliber
  • Engraving
  • Extra Barrel
  • Finishes
  • Frame
  • Front Strap & Main Spring Housing Treatment
  • Grip and Light
  • Guide Rods
  • Magwell / Main Spring Housing
  • Safety
  • Sight
  • Slide

Barrel Options

Price Upgrade
+ $300 Bull Barrel, Nighthawk Match, Includes Guide Rod and Plug*
+ $200 Fluted Barrel Upgrade, 9mm only
+ $200 Threaded Barrel Upgrade
+ $100 Flute Barrel Hood

Caliber Options

Price Upgrade
NO COST Change Caliber, .45 ACP (Standard)
NO COST Change Caliber, 9mm (No Cost)
+ $100 Change Caliber, .38 Super
+ $100 Change Caliber, 10mm

Engraving Options

Price Upgrade
+ $150 Custom Block Lettering
+ $50 No Roll Marks, Naked Slide

Extra Barrels

Price Upgrade
+ $450 Add Extra barrel, Threaded

Available Finishes

Price Upgrade
NO COST Cerakote finishes (burnt bronze, OD green, flat dark earth, sniper gray, tactical gray, satin mag)
+ $75 Black Out Option. Blacken Trigger, Barrel, Plug, and Bushing
+ $350 Battle-Worn Bronze Custom Finish, for New Pistol Order
+ $150 Smoked Nitride
+ $350 Battle-Worn Steel Custom Finish, for New Pistol Order
+ $350 Custom Silver Patriot Finish, with American Flag, New Pistol Order
+ $350 Shadow Camo Urban Finish, for New Pistol Order
+ $350 Shadow Camo Tan Finish, for New Pistol Order
+ $350 Shadow Camo Green Finish, for New Pistol Order
+ $350 Urban Multi Finish, for New Pistol Order, Black, Gray, OD, Urban Multi Colors
+ $200 Stainless Steel Upgrade, Complete Gun
+ $425 Polish all slide bevels, serrations, scallops, frame bevels, slide stop bevel, thumb safety bevel, hammer bevel, barrel bushing if uncrowned barrel, inside and flats of magwell, ends of screws, pins, and match catch. Polish ejection port bevels. Cann...
+ $150 Polish Flats of Frame and Slide

Frame Upgrades

Price Upgrade
+ $200 Aluminum Frame
+ $800 Double Stack Upgrade
+ $100 Recon Rail Upgrade
+ $50 Shorten Slide Stop & Bevel Frame
+ $175 Hand Stipple Underside of Trigger Guard
+ $200 Checker Front of Trigger Guard
+ $175 Checker Underside of Trigger Guard
+ $200 Hand Stipple Front of Trigger Guard

Front Strap & Main Spring Housing Treatment

Price Upgrade
+ $100 Checker Front Strap 20 Lines Per Inch
+ $100 Checker Front Strap 30 Lines Per Inch
+ $200 Hand Stipple Front Strap of Frame
+ $75 Hand Stipple Mainspring Housing
+ $100 Scallop Front Strap
+ $50 Scallop Mainspring Housing

Grip and Light Upgrades

Price Upgrade
+ $50 Railscale / Carbon Fiber Grip Upgrade
+ $360 Surefire X300 Ultra Upgrade, 1000 Lumens, 2-XBC Push/Toggle Z-XBC-Switch
+ $679 Surefire X400 Ultra Upgrade

Guide Rod Options

Price Upgrade
+ $50 Full Length Guide Rod Upgrade
+ $50 Everlast Upgrade

Magwell / Main Spring Housing Upgrades

Price Upgrade
+ $150 Countoured Carry Cut Upgrade

Safety Upgrades

Price Upgrade
+ $150 Ambi Safety Upgrade

Sight Upgrades

Price Upgrade
+ $100 Sight Upgrade, Nighthawk Gold Bead Front Sight Upgrade
+ $100 Sight Upgrade, Suppressor Ready Tall Sight Upgrade, Front and Rear sights
+ $50 Fiber Optic Front Sight Upgrade
+ $150 Adjustable Sight Upgrade, Nighthawk Fully Adjustable Sights with Tritium
+ $350 IOS Sight Upgrade - optic plate and RMR sold separately
+ $150 IOS plate for Trijicon RMR
+ $700 Trijicon RMR (RM06)

Slide Upgrades

Price Upgrade
+ $65 Ball Cut Radius on Slide
+ $115 Additional NH Extractor Finished and Tuned to match pistol, Note if checkering or serrations are needed on extractor.
+ $200 Checker Rear of Slide
Write Your Own Review
You're reviewing:Falcon Commander
Your Rating