|
The finish on your gun is
something that you want to take
pride in. It should be durable,
impervious to rust, immune from
any kind of cleaning chemicals,
be able to bathe in more salt
water than a Navy SEAL and still
come up looking like a million
bucks. That is exactly what
Perma Kote™ can do. It’s a
ceramic based finish that sets
the standard in the firearms
business. Tested for over 5,000
hours under salt water
immersion, as well as 5,000
hours under salt water spray at
40psi, it stayed rust free and
still the best looking finish on
the market, even after that kind
of exposure. We don’t pre-treat the guns by Parkerizing them to turn the metal black so you can’t see it wearing off. Perma
Kote™ is applied directly to the
prepared metal and it stands on
its own just fine. We’ll put it
up against any polymer finish on
the market.
Perma Kote™ also contains
properties for self lubricity.
It takes very little lubricant
for your gun to run at peak
performance if it has Perma Kote™
. We believe that the worst
thing that you can do is let
your gun run dry, so it is
paramount for us to have a
finish that would help to
compensate for someone not using
enough lubricant. The self
lubricating properties on Perma
Kote™ do just what they were intended to do.
Why don’t other companies use
it? The answer is it costs four
times as much as the popular
polymer finishes do. We strive
to give you the very best of
everything in the industry that
is available today. For now,
Perma Kote™ leads the pack, and
we have the best people that
know how to apply it.
Take a look at the color
examples. You can have any
solid, or combination of colors.
Once your gun has Perma Kote™
applied, each part is gone over
again to make sure the finish is
done perfectly. Once Robert is
satisfied that it is, he then
forwards it to Rodney (below)
for assembly and test fire.
After the assembly is complete,
it’s time to head to the range
for the afternoon.
All of our guns go through a
stringent test fire before they
leave the building. They have a
minimum of 75 rounds shot
through them before they are
sighted in and the test target
is shot. The magazines are
loaded and the gun is fired with
1, 2, 3 rounds and so on, to
make sure the gun feeds
flawlessly through each stage
and the slide locks back every
time once the last round is
fired. Each gun is tested with
various kinds of ammunition. We
make sure that every gun has
flawlessly fired some type of
hard ball, hollow points and
semi-wadcutters. This translates
into confidence for you, since
you know your guns has passed
all the stages of test fire
before you receive it. A test
target is included with a 3 shot
group on every gun we ship.
Our guns will feed almost any
type of ammunition. The manual
that comes with each gun will
let you know what is not
recommended for reliability.
Keep in mind though, no more
than you would put leaded gas in
a new Corvette, should you feed
cheap ammo through a high
performance custom handgun.
|
 |

Sniper Gray under
Black Slide

All Black

Titanium Blue under
Black

OD Green under Black

Desert Tan
|